Stainless Steel 304 Forged Parts – Cold Forged and Hot Forged | Manufacturer India
Cable Glands India is a specialist manufacturer and exporter of Stainless Steel 304 Forged Parts produced by both cold forging and hot forging processes. SS 304 (UNS S30400, EN 1.4301, ASTM A182 F304) is the most widely used austenitic stainless steel grade, offering an excellent combination of corrosion resistance, formability, and weldability. Our SS 304 forged parts supply electrical OEMs, EPC contractors, power utilities, process plant operators, and industrial distributors across the USA, UK, Europe, the Middle East, and Asia-Pacific markets.
Indicative Price: US$ 9.90/kilogram (ex-works Jamnagar, India; subject to forging process, size, and quantity)
Product Overview
SS 304 Hot Forged Parts
SS 304 hot forged parts are produced by heating billets to 1050–1200°C (within the austenitic single-phase field) and deforming them in closed dies on hydraulic or mechanical presses. Hot forging of SS 304 results in refined austenitic grain structure, elimination of casting porosity and segregation, and improved mechanical properties. SS 304 hot forged parts include SS 304 forged flanges (weld-neck, slip-on, blind, socket-weld, threaded), SS 304 forged valve bodies, SS 304 forged pipe fittings (elbows, tees, reducers), SS 304 forged pump impeller hubs, SS 304 forged shaft sleeves, SS 304 forged housings, SS 304 forged cable gland bodies, and SS 304 forged brackets. After hot forging, parts are solution-annealed at 1040–1080°C and water-quenched to restore full corrosion resistance and achieve a fully austenitic microstructure per ASTM A182 F304.
SS 304 Cold Forged Parts
SS 304 cold forging is performed at room temperature using high-tonnage presses (200–2,000 tonnes), achieving extremely tight dimensional tolerances (IT6–IT8, ±0.02–0.05 mm) and superior surface finish (Ra 1.6–3.2 µm) without heat treatment. Cold forging of SS 304 utilises the work-hardening behaviour of austenitic stainless steel: the initial yield strength of approximately 210 MPa increases to over 500–600 MPa after cold working, producing parts with exceptional strength. SS 304 cold forged parts include SS 304 cold forged precision connectors, SS 304 cold forged hex nuts, SS 304 cold forged bolts, SS 304 cold forged standoffs, SS 304 cold forged cable gland inserts, SS 304 cold forged earthing pins, SS 304 cold forged ferrules, SS 304 cold forged rivets, SS 304 cold forged contact pins, and SS 304 cold forged terminal inserts. Cold forged SS 304 parts offer the highest strength-to-weight ratio for stainless steel fasteners and connectors.
SS 304 Forged Flanges
We manufacture a complete range of SS 304 forged flanges per ASME B16.5, ASME B16.47, EN 1092-1 Part 2, DIN 2631-2638, and JIS B2220. Types: SS 304 weld-neck flanges (WN), SS 304 slip-on flanges (SO), SS 304 blind flanges (BL), SS 304 socket-weld flanges (SW), SS 304 threaded flanges (TH), SS 304 lap-joint flanges (LJ), SS 304 orifice flanges, and SS 304 reducing flanges. Pressure classes: 150, 300, 600, 900, 1500, 2500. Size range: ½” NB to 24″ NB (ASME B16.5); up to 60″ NB (ASME B16.47). Material certificates per EN 10204 Type 3.1 to ASTM A182 F304.
SS 304 Forged Pipe Fittings
SS 304 forged pipe fittings are manufactured per ASME B16.11 in socket-weld (SW) and threaded (TH) end connections. Fittings include SS 304 forged 90° elbows, SS 304 forged 45° elbows, SS 304 forged equal tees, SS 304 forged reducing tees, SS 304 forged cross fittings, SS 304 forged couplings, SS 304 forged half couplings, SS 304 forged caps, SS 304 forged hex plugs, SS 304 forged hex bushings, and SS 304 forged unions. Class 3000, 6000, and 9000 (socket-weld) and Class 2000, 3000, and 6000 (threaded) per ASME B16.11. Size range ¼” NB to 4″ NB.
SS 304 Forged Valve Components
SS 304 forged valve components include SS 304 forged gate valve bodies, SS 304 forged globe valve bodies, SS 304 forged check valve bodies, SS 304 forged ball valve bodies, SS 304 forged butterfly valve discs, SS 304 forged needle valve bodies, SS 304 forged plug valve bodies, SS 304 forged valve bonnets, SS 304 forged valve stems, SS 304 forged valve handwheels, and SS 304 forged valve seats. Pressure ratings Class 150 to Class 2500 per ASME B16.34. Compliant with NACE MR0175 for sour service on request.
SS 304 Forged Electrical Components
For the electrical and instrumentation sector, Cable Glands India supplies SS 304 forged cable gland bodies (metric M threads, PG threads), SS 304 forged cable gland locknuts, SS 304 forged armoured cable glands, SS 304 forged explosion-proof cable glands (ATEX/IECEx Exe/Exd/Exn), SS 304 forged conduit connectors, SS 304 forged earthing clamps, SS 304 forged grounding lugs, SS 304 forged busbar clamps, and SS 304 forged cable tray clamps. These are used where brass is unsuitable: food & beverage plants, pharmaceutical facilities, offshore platforms, wastewater treatment plants, and marine installations.
SS 304 Cold Forged Fasteners
SS 304 cold forged fasteners include hex bolts (M3–M36, A2-70 grade), machine screws, hex socket cap screws, set screws, hex nuts, flange nuts, coupling nuts, wing nuts, eye bolts, hook bolts, J-bolts, U-bolts, and foundation bolts to ISO 3506 Class A2-70 and A2-80. Cold forging produces fasteners with higher proof loads and fatigue resistance than machined equivalents. Thread rolling on cold forged blanks produces stronger threads with better fatigue resistance than cut threads. All fasteners comply with ASTM F593/F594 (inch) and ISO 3506 (metric).
SS 304 Forged Instrumentation Components
Precision SS 304 hot forged and cold forged instrumentation components include SS 304 tube fittings (compression type, single/double ferrule), SS 304 forged manifold bodies, SS 304 forged pressure gauge connectors, SS 304 forged flow instrument bodies, SS 304 forged thermowell flanges, SS 304 forged impulse pipe connectors, and SS 304 forged process valves. Tolerances to ±0.01 mm on sealing faces; Ra 0.4–0.8 µm on sealing surfaces; compliance with ASME B31.3 process piping requirements.
Key Features
- SS 304 (UNS S30400) – most widely specified austenitic stainless steel globally
- Both hot forged (1050–1200°C) and cold forged (room temperature) processes
- Hot forged: superior grain flow, improved fatigue life 3–5× castings
- Cold forged: yield strength 500–600 MPa (vs. 210 MPa annealed), tight tolerances ±0.02 mm
- Corrosion resistance: passive Cr2O3 layer, suitable for atmospheric, water, and mild acid service
- Non-magnetic in annealed condition; slight magnetism after cold forging (work hardening)
- EN 10204 Type 3.1 mill test certificates standard
- Solution annealing available for hot forged parts to restore full corrosion resistance
SS 304 Mechanical Properties (Annealed, per ASTM A182 F304)
Tensile strength (UTS): ≥ 515 MPa. Proof stress (0.2% offset): ≥ 205 MPa. Elongation (in 50 mm): ≥ 40%. Reduction of area: ≥ 50%. Hardness: ≤ 187 HB (≤ 92 HRB). Charpy V-notch impact: typically 150–200 J at room temperature. These properties make SS 304 forged parts ideal for low- and moderate-temperature service from –196°C (cryogenic with special qualification) to +870°C (continuous) and +925°C (intermittent).
SS 304 Cold Work Strengthening
One of the unique advantages of SS 304 is its capacity for work hardening. During cold forging, the austenite partially transforms to martensite under high strain, dramatically increasing strength. At 10–20% cold reduction, yield strength increases from 210 MPa to 350–450 MPa. At 40–60% cold reduction (typical for cold forged fasteners), yield strength reaches 550–650 MPa, exceeding many alloy steels. This makes SS 304 cold forged parts the preferred choice for high-strength stainless fasteners without the need for precipitation hardening alloys.
Corrosion Resistance of SS 304 Forgings
SS 304 resists oxidation, atmospheric corrosion, food product acids, mild chemicals, and most water environments. Forging followed by solution annealing ensures a uniform chromium-depleted zone is eliminated and the passive layer is fully restored. Passivation per ASTM A967 is standard. SS 304 is not recommended for environments with high chloride concentrations (seawater, de-icing salts) or strong reducing acids; for those, SS 316L is specified. Sensitisation (carbide precipitation) is prevented by maintaining carbon below 0.08% (SS 304) or using SS 304L (max 0.03% C) for welded assemblies.
Post-Forge Heat Treatment Options
Solution annealing (SA): 1040–1080°C, rapid water quench – standard for hot forged SS 304 parts. Stress relief: 425–480°C (not recommended for sensitisation-sensitive applications). Sub-zero treatment: not applicable for austenitic grades. Descaling: acid pickling in HNO3/HF bath per ASTM A380. Passivation: citric acid or nitric acid per ASTM A967 / ASTM A380. Electropolishing available for hygienic, medical, and food-grade applications.
Welding and Fabrication of SS 304 Forgings
SS 304 forged components are fully weldable by GTAW (TIG), GMAW (MIG), SMAW (stick), SAW, and laser welding. Recommended filler: ER308L (TIG/MIG) or E308L-16 (stick). No preheat required; interpass temperature max 150°C. Post-weld annealing recommended for heavy sections. For welded pressure systems, SS 304L forgings (ASTM A182 F304L) are specified to prevent sensitisation and intergranular corrosion in the HAZ.
Technical Specifications
| Parameter | SS 304 Hot Forged | SS 304 Cold Forged |
|---|---|---|
| Process Temperature | 1050–1200°C | Room temperature (max 100°C rise) |
| Press Capacity | 500–5,000 tonne | 200–2,000 tonne |
| Dimensional Tolerance | DIN 7526 Form E (±0.3–0.8 mm) | ±0.02–0.05 mm |
| Surface Finish (as-produced) | Ra 3.2–12.5 µm | Ra 1.6–3.2 µm |
| Yield Strength (0.2%) | ≥ 205 MPa (after SA) | 500–650 MPa (work-hardened) |
| Tensile Strength | ≥ 515 MPa | 700–900 MPa (work-hardened) |
| Hardness | ≤ 187 HB | Up to 30 HRC (cold worked) |
| Heat Treatment | Solution anneal 1040–1080°C, WQ | Not required (but SA available) |
| Weight Range | 50g to 200 kg | 1g to 500g |
| NDT | LPT, UT, RT (on request) | LPT (standard) |
SS 304 International Grade Equivalents
| Standard | Grade Designation | C% | Cr% | Ni% |
|---|---|---|---|---|
| ASTM/ASME (USA) | SS 304 / Type 304 / A182 F304 | ≤0.08 | 18.0–20.0 | 8.0–10.5 |
| EN (Europe) | 1.4301 / X5CrNi18-10 | ≤0.07 | 17.5–19.5 | 8.0–10.5 |
| DIN (Germany) | X5CrNi18-10 / 1.4301 | ≤0.07 | 17.0–19.5 | 8.0–10.5 |
| BS (UK) | 304S31 | ≤0.08 | 17.0–19.0 | 8.0–11.0 |
| JIS (Japan) | SUS304 | ≤0.08 | 18.0–20.0 | 8.0–10.5 |
| GOST (Russia) | 08Х18Н10 / AISI 304 | ≤0.08 | 17.0–19.0 | 9.0–11.0 |
| GB (China) | 06Cr19Ni10 / S30408 | ≤0.07 | 18.0–20.0 | 8.0–11.0 |
| IS (India) | 04Cr18Ni10 | ≤0.08 | 17.5–19.5 | 8.0–10.5 |
Product Types and Variants
- SS 304 Hot Forged Flanges (all types, ASME B16.5, EN 1092-1)
- SS 304 Hot Forged Pipe Fittings (ASME B16.11)
- SS 304 Hot Forged Valve Bodies and Trim
- SS 304 Hot Forged Cable Gland Bodies and Locknuts
- SS 304 Hot Forged Earthing Clamps and Grounding Lugs
- SS 304 Cold Forged Fasteners (hex bolts, studs, nuts, eye bolts) – A2-70/A2-80
- SS 304 Cold Forged Precision Connectors and Terminals
- SS 304 Cold Forged Inserts and Standoffs
- SS 304 Cold Forged Rivets and Pins
- SS 304 Cold Forged Custom Components (per drawing)
Applications by Industry
- Chemical & Petrochemical: Flanges, pipe fittings, valve bodies, pump components
- Food & Beverage: Hygienic fittings, sanitary flanges, clean-room fasteners, food-grade valves
- Pharmaceutical: Pure water system fittings, CIP/SIP valve components, clean steam fittings
- Electrical & EPC: SS 304 cable gland bodies, conduit fittings, earthing clamps, cable tray components
- Water Treatment: Pump flanges, pipe fittings, valve bodies, filter housings
- Power Generation: Cable gland housings, earthing components, structural brackets
- Architecture & Construction: Structural fasteners, handrail fittings, facade anchors
- Marine: Deck fittings, pipe flanges, cable gland bodies (nickel-plated or passivated)
Manufacturing Process
Hot Forging Route: SS 304 billets (ASTM A182 F304 certified) → cut to billet weight → induction heating to 1050–1200°C → optical pyrometer check → closed-die forging on hydraulic press → flash trimming → solution annealing (1040–1080°C, water quench) → shot blasting → acid pickling & passivation (ASTM A967) → CNC machining (if required) → CMM inspection → hardness testing → LPT → packing with MTC.
Cold Forging Route: SS 304 wire rod or bar (annealed, coated) → drawing to required diameter → cold heading / cold forging (progressive or single-station) → thread rolling (if applicable) → deburring → dimensional inspection → LPT → passivation per ASTM A967 → packing with MTC.
Quality Standards and Certifications
- ISO 9001:2015 Quality Management System
- ASTM A182 Grade F304 (Forged Stainless Steel Flanges and Fittings)
- ASME B16.5 / B16.11 / B16.34 (Dimensional and Pressure Standards)
- EN 10222-5 (Steel Forgings for Pressure Purposes – Stainless and Heat-Resisting Steels)
- EN 10204 Type 3.1 / 3.2 Mill Test Certificates
- ISO 3506 / ASTM F593 (Stainless Fasteners)
- NACE MR0175 / ISO 15156 (Sour Service, on request)
- PED 2014/68/EU Pressure Equipment Directive
- NABL Third-Party Testing Certification
- RoHS and REACH Compliant
Why Choose Cable Glands India?
- Dual Process Capability: Both hot forging and cold forging of SS 304 under one roof
- Grade Expertise: Deep experience with SS 304, 304L, 316, 316L, duplex, super duplex
- Global Delivery: Export to USA, UK, EU, Australia, Middle East, Africa, and Asia-Pacific
- Competitive Pricing: US$ 9.90/kg indicative; volume pricing available from 500 kg
- Lead Time: 4–6 weeks standard; 6–10 weeks new tooling
- Complete Documentation: EN 10204 Type 3.1/3.2 MTCs, CoC, NABL reports standard
Frequently Asked Questions
What is the difference between SS 304 hot forged and cold forged parts?
Hot forged SS 304 parts are produced above 1050°C, giving excellent formability, near-net shape, and annealed mechanical properties (UTS ≥ 515 MPa, 0.2% PS ≥ 205 MPa). Cold forged SS 304 parts are produced at room temperature with work hardening, giving much higher strength (yield 500–650 MPa) and tighter tolerances (±0.02 mm), suited for fasteners, pins, and small precision components.
Is SS 304 the right grade for my application?
SS 304 is suitable for most general industrial, food, pharmaceutical, and water service applications. Use SS 316L instead if you have chloride-rich environments (seawater, marine, coastal), concentrated acidic media, or high-temperature sulphurous environments. Use SS 304L (low carbon) for welded assemblies to prevent sensitisation.
What is the maximum service temperature for SS 304 forged parts?
SS 304 forged parts are suitable for continuous service up to 870°C (oxidising atmospheres). For service above 425°C with intermittent cooling, use SS 304H (higher carbon) to prevent sigma phase embrittlement. For cryogenic service down to –196°C, SS 304 is fully suitable without impact test qualification at most pressure vessel codes.
What standards do your SS 304 forged flanges meet?
Our SS 304 forged flanges conform to ASME B16.5 (NPS ½”–24″), ASME B16.47 (NPS 26″–60″), EN 1092-1, DIN 2631–2638, JIS B2220, and BS 4504. Material per ASTM A182 F304. Certificates per EN 10204 Type 3.1 standard, Type 3.2 available on request.
Can you supply SS 304 cold forged fasteners to ISO 3506 A2-80?
Yes. We supply SS 304 cold forged fasteners to ISO 3506 Grade A2-70 (standard) and A2-80 (high tensile, cold worked). A2-80 bolts have proof stress ≥ 640 MPa, UTS ≥ 800 MPa. Sizes M3 to M36; inch sizes 3/16″ to 1½” UNC/UNF. Hex bolts, stud bolts, hex nuts, socket cap screws, and custom fasteners.
What surface finish can you achieve on SS 304 forged parts?
As hot forged: Ra 3.2–12.5 µm. After CNC machining: Ra 0.8–3.2 µm. After electropolishing: Ra 0.2–0.8 µm. Electropolished SS 304 forged parts are used in pharmaceutical, food, and high-purity water applications. Cold forged surfaces: Ra 1.6–3.2 µm (as-forged).
Do you supply solution-annealed SS 304 forgings?
Yes. All hot forged SS 304 parts are standard solution-annealed (1040–1080°C, water quench) to restore full corrosion resistance and achieve a fully austenitic microstructure per ASTM A182 F304. Heat treatment certificates and hardness test reports are provided with each shipment.
What is the lead time for SS 304 forged parts?
Standard products (existing tooling): 4–6 weeks from order confirmation. Custom components (new dies): 8–12 weeks. Expedited production for critical requirements: contact our sales team for availability.
Multilingual Equivalent Terms
Spanish: Piezas Forjadas de Acero Inoxidable 304, Forja en Frío y Caliente Acero Inoxidable 304, Componentes AISI 304 Forjados
Russian: Поковки из нержавеющей стали 304, Детали из AISI 304 горячего и холодного деформирования, Кованые изделия 08Х18Н10
French: Pièces Forgées en Acier Inoxydable 304, Forgeage à Froid et à Chaud Inox 304, Composants 1.4301 Forgés
Portuguese: Peças Forjadas em Aço Inoxidável 304, Forjamento a Frio e a Quente AISI 304, Componentes Forjados Inox 304
Italian: Parti Forgiate in Acciaio Inossidabile 304, Forgiatura a Freddo e a Caldo Inox 304, Componenti 1.4301 Forgiati
Related Products
Forging and Hot Stamping Overview | Copper Forging & Forged Parts | SS 316L Forged Parts | SS 304L Forged Parts | Duplex SS 2205 Forgings | SS Cable Glands | SS Earthing Clamps | SS ASME B16.5 Flanges | SS Pipe Fittings ASME B16.11 | SS Fasteners ISO 3506 A2-70
Get a Quote
Contact Cable Glands India for competitive pricing on Stainless Steel 304 Forged Parts – cold forged and hot forged. Indicative price: US$ 9.90/kilogram (ex-works Jamnagar). Send drawings or specifications to sales@cableglandsindia.com or call +91 22 4344 9300. We respond within 24 hours.